Watch Out for These 13 Plumbing Problems

June 23, 2022

Keeping an eye on your utilities is a great way to minimize the impact of potential problems. Your plumbing system is no different, and it helps to be aware of the most common problems. Depending on the extent of the problem, you might be able to perform DIY plumbing repair by yourself. Let’s examine 13 of the most common plumbing services and what it might take to solve them.

Common Faucet Problems

Your home has multiple faucets in rooms including the bathroom and kitchen. Because faucets bring water from your plumbing, common problems can reduce or cut off water flow. In some cases you’re dealing with the opposite problem, which is too much water dripping out of the faucet.

Faucet Spout Is Leaking

What creates this problem? Faucets with two handles are known as cartridge-style faucets. These cartridges are valves that control water running into the spout. When a cartridge is defective, it can lead to a leak. It might also be a corroded valve seat, which joins the faucet and spot together.

How do I fix it? Finding the broken or worn-down part and exchanging it should deal with the leak. If it doesn’t, more than one component may be damaged.

Estimated repair cost: Replacement parts for the cartridges or valve seat can run between just a few dollars to about $80 depending on the make and model.

Faucet Base Is Leaking

What causes this problem? A Majority of the time, a leak near the base is because the seal or O-ring has worn out. Without a strong seal, water can push through the stem and start leaking.

How do I fix it? Sometimes the issue can be resolved with a thorough cleaning of the seal and O-ring. If not, the component will have to be swapped out.

Estimated repair cost: An individual O-ring costs around $2. It might be a good idea to choose a pack of several so that you can quickly take care of this plumbing repair job again the next time a leak appears.

Faucet Is Leaking Underneath the Sink

What causes this problem? A loose connection is the most probable culprit. This could be where the sink’s pipes hook up to the main water supply as well as by the drain or P-trap connection. Particularly old faucets can be corroded to the point where they can’t maintain secure connections.

How do I fix it? Discovering the source of your leak is important since this leak may not be instantly noticeable. If tightening the connections doesn’t solve things, you’ll want to inspect the faucet itself.

Estimated repair cost: The cost to resolve things can fluctuate depending on where the leak is coming from, especially if water damage is encountered.

Common Toilet Problems

We depend on our toilets to function cleanly and efficiently. If your toilet is experiencing a problem, you’ll want to check out these places first.

Toilet Is Clogged

What causes this problem? Even a partial clog can impede the drainage of your toilet. For most clogs, a trustworthy plunger will be your first line of defense.

How do I fix it? Lift up the flapper valve to see how the toilet is draining. Slow or no drainage is a good sign there’s a clog. You should use a plunger to try to clear the clog, or a toilet snake if that doesn’t work.

Estimated repair cost: In many cases, removing a clog from your toilet won’t cost you a thing. When the plunger doesn’t work, the clog might be further in the pipes. At this point it may be a good idea to employ local plumbing services in Neptune City.

Toilet Is Running

What causes this problem? Toilets refresh their water supply from the tank after each flush. When too much water comes from the tank, it makes your toilet run constantly. Replacing one or several parts should resolve things.

How do I fix it? It could be the float arm, the flapper or the refill tube as a problem with any of these parts can result in a running toilet. You can observe the flushing/refilling cycle to pinpoint where the issue is.

Estimated repair cost: These components vary in cost between $13 and $70. There’s a possibility the toilet is running simply because something has fallen out of place. In this case, it could be free to take care of your problem!

Toilet Is Leaking from the Tank

What causes this problem? Toilet tanks are made from materials such as porcelain. With the exception of damage to the tank itself, the leak is most likely coming from a worn-down rubber seal attached to places like the bolts, the spud washer or the refill valve.

How do I fix it? Test the water level inside the tank, as you may be able to narrow down the leak’s location. You’ll then want to empty the tank and detach it from the toilet bowl. You will remove the fill valve and the connection bolts first, examining the spud washer when the tank is free. Look for defective rubber or signs of corrosion.

Estimated repair cost: These rubber seals are normally only a few dollars. If the tank itself is broken, however, a replacement might cost more than $200. This may be a job for professional plumbing companies who handle the process quickly and efficiently.

Toilet Is Loose

What causes this problem? If your toilet seems wobbly or loose, it could be a damaged bolt or the wax seal ring running around the base. It can also be the toilet flange, which joins the bowl to your home’s drainage system.

How do I fix it? Tightening the bolts is simple, as is replacing them. If the problem is the wax seal or the flange, you’ll want to be wary not to break the toilet bowl. Some homeowners prefer having professional plumbing services in Neptune City when the toilet has to be disconnected.

Estimated repair cost: Replacement bolts are inexpensive, with replacement flanges averaging $20 or so.

Common Low Water Pressure Problems

Bad water pressure can make all kinds of household chores more challenging and time-consuming. It’s particularly discouraging when it is affecting key fixtures such as the showerhead or the kitchen sink.

Low Water Pressure in the Shower

What causes this problem? If your shower’s water pressure is too low, it can be a problem with a valve or mineral buildup inside the showerhead. A dirty shower can be cleaned, but damage to the showerhead might make replacing it the most cost-effective option.

How do I fix it? Let the shower head soak in vinegar for a long time. This should clear away sediment or other clogs. Readjusting the pressure valve might also help. If the pressure is still too low, swapping to another showerhead might resolve things.

Estimated repair cost: Cleaning the showerhead is free, and it’s suggested you attempt this first just in case. When swapping to another make and model, the cost will vary depending on what you go with.

Low Water Pressure in the Kitchen Sink

What causes this problem? Two common causes of bad water pressure in your kitchen faucet are a clogged aerator or a clogged cartridge. The aerator is right near the spout, depositing air into the water as it passes through. Cartridges regulate the flow of hot vs. cold water.

How do I fix it? Cleaning the aerator may solve your water pressure problem. Exchanging the faucet’s cartridges could also handle things.

Estimated repair cost: Replacing the aerator can cost around $5 and $25 depending on which model you get. Cartridges often average $45 to $60.

Common Drain Problems

A problem with your drain can slow cooking and cleaning down. And if it’s completely backed up, you’ll have to clear it before you can use the sink or tub again. Since drains are only configured to carry water outside of your home, problems center around being unable to do so.

Drain Is Clogged

What causes this problem? Big objects, mineral buildup and other materials can accumulate in the drain, stopping it up. This can happen steadily or all at once depending on the nature of the clog.

How do I fix it? There are many options for clearing out drain clogs. Some chemicals can help push clogs into the rest of the plumbing while a drain snake reaches in and drags solid material out. Deep clogs might need special attention.

Estimated repair cost: The cost for these materials is relatively low, between $8 and $30. If you can’t clear the clog, local plumbing services in Neptune City can help.

Drain Is Slow

What causes this problem? This is most likely a clog in progress. It hasn’t completely blocked the drain yet, but an obstruction has formed.

How do I fix it? You can likely clear this with chemicals or a snake. In some cases it may resolve itself, but you don’t want to risk it developing into a complete clog.

Estimated repair cost: Materials will probably cost between $8 and $30 based on brand choices. The unique nature of the clog might make one or the other more useful.

Common Burst Pipe Problems

A burst pipe is a serious issue that can harm not just your plumbing but areas of your home around it. Ultimately any burst pipe problem will be traced back to the damaged piping. In some cases other issues like water damage or low water pressure will appear first.

Burst Pipe That’s Frozen

What causes this problem? Expanding ice or trying to wrench a frozen pipe free can cause this problem. Most homes are warm enough to stop the pipes from freezing, but severe cold and low use can lead to freezing.

How do I fix it? You’ll want to wait until the pipe is thawed out before you can start repairs. The water supply will be turned off while the section of pipe is replaced. If water damage has occurred, you may need extra plumbing repair.

Estimated repair cost: Costs will vary depending on the extent of the damage. Large sections of piping are more expensive, especially if they are made from a high-quality material. You could pay anywhere from $30 to more than $150

Burst Pipe That’s Behind a Wall

What causes this problem? Damage, corrosion and even pests can result in a broken pipe in your home. With the added hassle of the piping being tucked away behind a wall, this could be a task more appropriate for local plumbing companies in Neptune City.

How do I fix it? Replacing a broken pipe requires getting to the piping itself. This can be more challenging when the pipe is behind a wall. You might have to clear a large enough section away where work can be managed comfortably.

Estimated repair cost: This problem may need specialized tools and experience thanks to confined working conditions and corroded piping. If you don’t have this equipment already, the job might be more suitable for professionals. Expert plumbing repair can find burst pipes behind walls and resolve the problem. Average costs can vary considerably, usually around $150.